Strongbond Express FT Adhesive 4 Litre

Strongbond Adhesive FT 4 litre
A solvent-based trowel adhesive, developed for securely bonding needle punch carpets to both timber and concrete surfaces.
Properties
Exceptional Initial Grab: This adhesive provides an extremely strong initial grab, ensuring your carpets stay firmly in place from the moment of installation.
Gap Filling Capabilities: It’s designed to fill gaps effectively, providing seamless, long-lasting results for all your flooring projects.
Versatile Application: Suitable for most interior surfaces, Strongbond FT is the go-to choice for any indoor carpeting needs.
Water Resistant: With its water-resistant formulation, this adhesive withstands moisture, making it ideal for various environments without compromising bond strength.
Specifications
Colour: Brown
Viscosity: Paste
Composition: Synthetic rubber blend
Application temperature: 5 to 30°C
Open Time: Up to 10 minutes at 25°C
Solid content: 46 to 50%
Coverage: 2 – 4m²/L for 2 – 3mm notch trowel, dependent on substrate porosity
Available in 4L & 20L pails
Strongbond Express FT Adhesive Technical Data:
- Substance Disposal:
- Do not let this product enter the environment.
- Do not dispose of down drains or into local waterways.
- Recycle or recover whenever possible.
- Dispose of substance to a hazardous or special waste collection point or through a licensed contractor.
- Normally suitable for incineration by an approved agent.
- Container Disposal:
- Recycle if possible, or dispose of to a hazardous or special waste collection point.
- Empty flammable liquid drums present an explosion hazard if cut by flame or welding torch.
- Ensure drums are thoroughly cleaned and ventilated.
- Local Legislation: Disposal should be in accordance with Hazardous Substances (Disposal)Regulations 2001, and with any other applicable regional and national laws and regulations.
- Storage: Store in a cool, dry, well ventilated place and out of direct sunlight:
- Keep away from heat, sparks, open flames and any other sources of ignition
- Static electricity must be avoided
- Store away from any incompatible materials as defined in Section 10 of this SDS
- Keep containers closed when not in use
- Check regularly for leaks
- For unit sizes of 20 litres or more, store according to HSNO