Ardex AF460 MS Timber Adhesive 18kg

Ardex AF460 MS Timber Adhesive 18kg

ARDEX AF 460 MS

is a solvent-free, low-odour, one-component adhesive based on MS Polymer technology, specifically designed for bonding engineered timber floor coverings, cork, and ARDEX sound insulation and decoupling mats.

Key Features:

  • Solvent-Free and Low Odour: Ensures a healthier indoor environment during application.

  • High Bond Strength: Provides a strong and durable bond suitable for both commercial and domestic settings.

  • Moisture and Weather Resistant: Suitable for areas with varying humidity and temperature conditions.

  • High Temperature Resistance: Ideal for use in areas with direct sunlight or underfloor heating systems.

  • Very Low Emissions: Meets the EMICODE licence 'EC1 PLUS R', achieving very low emission limits.

Specifications:

  • Packaging: Available in 18 kg plastic tubs.

  • Coverage: Approximately 0.8 to 1.0 kg per m² for on-edge lamella parquet; 0.8 to 1.5 kg per m² for sound insulation and decoupling mats. Coverage may vary depending on substrate texture.

Application Areas:

  • Floor Coverings: Suitable for engineered timber, strip parquet, cork, and ARDEX sound insulation and decoupling mats.

  • Substrates: Compatible with all suitable absorbent and non-absorbent substrates.

Substrate Preparation:

  • Ensure the subfloor is dry, clean, firm, and free from dust, dirt, oil, grease, curing compounds, release agents, and other barrier materials.

  • Uneven subfloors should be levelled with appropriate ARDEX levelling and smoothing compounds.

Application Instructions:

  1. Priming: Priming is not required over ARDEX levelling compounds. Use ARDEX PU 30 over other substrates as per the product datasheet.

  2. Application: Apply ARDEX AF 460 MS evenly to the prepared substrate using the appropriate serrated trowel, held at approximately a 60-degree angle to the subfloor.

  3. Floor Covering Installation: Install the floor covering directly into the wet adhesive, pressing down to ensure full contact.

  4. Curing: Allow the adhesive to cure as per the specified times before subjecting the floor to traffic or use.

 

Product Technical and Safety Information:

 

TDS: Ardex AF 460 MS

 

SDS: Ardex AF 460 MS

Write Review

There are not yet any reviews on this product.

Instagram LookFloors

Subscribe to our newsletters

Sign up successful!