Ardex MC Rapid One Coat Moisture Control System 10 kg

Ardex MC Rapid One Coat Moisture Control System 10 kg


Ardex MC Rapid Moisture Control System. Key benefits include:

  • 100% solids epoxy moisture management system 
  • Formulated to suppress excessive moisture vapour emissions in new or existing concrete prior to installing an ardex underlayment with flooring
  • One-coat epoxy resin system
  • Solvent free, alkali resistant
  • Reduces vapour emissions to below maximum acceptable levels for floor coverings
  • Use under all standard commercial and residential floor coverings on interior substrates only



Ardex MC Rapid One Coat Moisture Control System 10 kg:

  • Mixing Ratio: Add entire pre-measured Contents of Part B (hardener) into Part A (resin).
  • Coverage on CSP 3 Prepared Concrete: Max. 25m² per mixed unit of ARDEX MC RAPID (Will vary with surface profile)
  • Permeability (ASTM E96): 1 coat at 0.25mm or 250µm 2 coats, each at 0.25mm or 250µm with sand in 2nd
  • Effect of 14 pH Solution (ASTM D1308): No effect
  • Working Time: 20 minutes
  • Pot Life: 20 minutes
  • Walkable: 4 hours
  • Prime and install underlayment: Min. 4 hours Max. 24 hours
  • VOC: 0 g/L (calculated and reported, SCAQMD 1113)
  • Packaging: 10kg unit
  • Storage: Store in a cool dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
  • Shelf Life: 1 year, if unopened
Write Review

There are not yet any reviews on this product.

Instagram LookFloors

Subscribe to our newsletters

Sign up successful!