Bona Traffic and Hardener (Matt)

Bona Traffic and Hardener (Matt)

Bona Traffic and Hardener (Matt). Key benefits include:

  • Two-component waterborne 100% polyurethane finish for the surface treatment of wooden floors in commercial premises where a very high resistance to wear is required.
  • Suitable for overcoating factory pre-finished cork floors
  • Traffic Matt provides a clear natural appearance giving “invisible protection” and the look of an oiled floor but, unlike oil, offers years of virtually maintenance-free protection
  • Traffic Silk Matt has a higher sheen level but all the other qualities of the matt version
  • Contains less than 10% solvents
  • Superb scratch and chemical resistance
  • High scuff resistance
  • Non-yellowing surface
  • Meets DIN norm 18 032 and BS 7044:1990 for slip resistance
  • Meets NORM C 2354 Category C (very heavy wear)


Bona Traffic and Hardener (Matt). Technical data include:

  • Type of finish: 2-comp. waterborne 100% polyurethane finish
  • Solids content:  Approx. 33%
  • pH-value: Approx. 8
  • Viscosity: Approx. 24 sec. (25°C, FC4)
  • Resistance to wear: Approx. 2.5 mg/100 revolutions (SIS 923509)
  • Sheen (at 60°):  Invisible Protection: approx. 15,
  • Silk Matt: approx. 45
  • Mixing ratio: 1 part Traffic Hardener to 10 parts Traffic
  • Pot life: 5 hours at 20C
  • Drying time: 3–4 hours at 20°C/60% R.H.
  • Application tools: Roller or applicator
  • Application rate: 8–10 m/litre (120–100g/m2) per coat
  • Safety: Finish: Unclassified
  • Hardener: Classified (see the Safety Data Sheet)
  • Shelf life: 1 year, from date of production, in unopened original container
  • Storage/transport: The temperature must not fall below +5°C or exceed +25°C during storage and transport
  • Disposal: Wastes and emptied containers should be handled in accordance with local regulations
Write Review

There are not yet any reviews on this product.

Instagram LookFloors

Subscribe to our newsletters

Sign up successful!